PS Corporation

• Pressure Type: Gauge pressure (relative to atmospheric pressure)

• Rated Pressure Range: -100.0 to +100.0 kPa

• Set Pressure Range: -101.0 to +101.0 kPa

• Pressure Withstandability: 500 kPa

• Applicable Fluid: Non-corrosive gases

• Supply Voltage: 12 to 24 V DC ±10%

• Power Consumption:

  • Normal operation: 720 mW or less (30 mA at 24 V)

  • ECO mode: 480 mW or less (20 mA at 24 V)

• Output Type: NPN open-collector transistor

  • Maximum sink current: 100 mA

  • Residual voltage: 2 V or less at 100 mA

• Output Modes: NO/NC selectable; EASY mode, Hysteresis mode, Window comparator mode

• Repeatability: ±0.1% F.S. (within ±2 digits)

• Response Time: Selectable from 2.5 ms to 5,000 ms

• Display: 4-digit + 4-digit 3-color LCD

• Protection Rating: IP40

• Ambient Temperature: -10 to +50°C

• Ambient Humidity: 35 to 85% RH (no condensation)

• Pressure Port: M5 female thread + R (PT) 1/8 male thread

• Material:

  • Enclosure: PBT (glass fiber reinforced)

  • Display: Acrylic

  • Pressure port: Stainless steel (SUS303)

  • Mounting threaded part: Brass (nickel plated)

• Weight: Approximately 40 g (net), 130 g (gross)

• Accessories: CN-14A-C2 (2-meter cable with connector)

• Pressure Measurement Type: Gauge pressure

• Rated Pressure Range: -0.100 to +1.000 MPa

• Set Pressure Range: -0.101 to +1.010 MPa

• Pressure Withstandability: 1.5 MPa

• Applicable Fluid: Non-corrosive gas

• Supply Voltage: 12 to 24 V DC ±10%

• Power Consumption:

  • Normal operation: 720 mW or less

  • ECO mode: 480 mW (STD), 360 mW (FULL)

• Output Types:

  • Comparative Output: NPN open-collector transistor (100 mA max)

  • Output Modes: NO/NC, EASY mode, Hysteresis mode, Window comparator mode

  • Response Time: Selectable from 2.5 ms to 5,000 ms

• Analog Output:

  • Voltage: 0.6 to 5 V

  • Current: 2.4 to 20 mA

• Display: 4-digit + 4-digit 3-color LCD (Red, Green, Orange)

• Protection Rating: IP40

• Operating Temperature: -10 to +50°C

• Storage Temperature: -10 to +60°C

• Weight: 40 g (net), 130 g (gross)

• Cable Length: Up to 100 m with 0.3 mm² or larger cable

• Included Accessories: 2 m connector cable (CN-14A-C2)

• Pressure Type: Gauge pressure

• Rated Pressure Range: −0.100 to +1.000 MPa

• Set Pressure Range: −0.101 to +1.010 MPa

• Pressure Withstandability: 1.5 MPa

• Applicable Fluid: Non-corrosive gases

• Supply Voltage: 12 to 24 V DC ±10%

• Power Consumption: Up to 720 mW in normal operation; 360 mW in full ECO mode

• Output Options:

  • Comparative Output: PNP open-collector transistor (max 100 mA)

  • Analog Voltage Output: 0.6 to 5 V

  • Analog Current Output: 2.4 to 20 mA

• Display: 4-digit + 4-digit 3-color LCD

• Protection Rating: IP40

• Ambient Temperature: −10 to +50°C

• Cable Length: Up to 100 m with 0.3 mm² or larger cable

• Weight: Approximately 40

1. The signal is used by machines/controllers for positioning, synchronization, or t

If you want, I can give you a block diagram, application example with wiring, or types with specifications used in industries.

• Pressure Type: Gauge pressure

• Rated Pressure Range: −100.0 to +100.0 kPa

• Set Pressure Range: −101.0 to +101.0 kPa

• Pressure Withstandability: 500 kPa

• Applicable Fluid: Non-corrosive gas

• Supply Voltage: 12 to 24 V DC ±10%, ripple peak-to-peak 10% or less

• Power Consumption:

  • Normal operation: 720 mW or less (30 mA at 24 V)

  • ECO mode: 480 mW or less (20 mA at 24 V)

  • FULL ECO mode: 360 mW or less (15 mA at 24 V)

• Output Type: PNP open-collector transistor

  • Maximum source current: 100 mA

  • Residual voltage: 2 V or less at 100 mA

• Output Operation: NO/NC selectable via key operation

• Output Modes: EASY mode, Hysteresis mode, Window comparator mode

• Repeatability: ±0.1% F.S. (within ±2 digits)

• Response Time: Selectable from 2.5 ms to 5,000 ms

• Display: 4-digit + 4-digit 3-color LCD

  • Displayable pressure range: −101.0 to +101.0 kPa

• Indicators: Orange LED lights up when each comparative output is ON

• Protection Rating: IP40

• Ambient Temperature: Operating: −10 to +50°C; Storage: −10 to +60°C

• Ambient Humidity: 35% to 85% RH (no condensation or icing allowed)

• Voltage Withstandability: 1,000 V AC for one minute between all supply terminals connected together and enclosure

• Insulation Resistance: 50 MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure

• Vibration Resistance: 10 to 500 Hz frequency, 3 mm double amplitude or maximum acceleration 196 m/s², in X, Y, and Z directions for two hours each

• Shock Resistance: 100 m/s² acceleration (10 G approx.) in X, Y, and Z directions three times each

• Temperature Characteristics: Within ±0.5% F.S. at +20°C

• Pressure Port: M5 female thread + G 1/8 male thread

• Pressure Measurement Type: Gauge pressure

• Rated Pressure Range: -0.100 to +1.000 MPa

• Set Pressure Range: -0.101 to +1.010 MPa

• Pressure Withstandability: 1.5 MPa

• Applicable Fluid: Non-corrosive gas

• Supply Voltage: 12 to 24 V DC ±10%

• Power Consumption:

  • Normal operation: 720 mW or less

  • ECO mode: 480 mW (STD), 360 mW (FULL)

• Output Types:

  • Comparative Output: PNP open-collector transistor (100 mA max)

  • Output Modes: NO/NC, EASY mode, Hysteresis mode, Window comparator mode

  • Response Time: Selectable from 2.5 ms to 5,000 ms

• Display: 4-digit + 4-digit 3-color LCD (Red, Green, Orange)

• Protection Rating: IP40

• Operating Temperature: -10 to +50°C

• Storage Temperature: -10 to +60°C

• Weight: 40 g (net), 130 g (gross)

• Cable Length: Up to 100 m with 0.3 mm² or larger cable

• Included Accessories: 2 m connector cable (CN-14A-C2)

• 10 to 100 mm stroke
• Double support of the control rod and return spring
• Tip with M2.5 thread and stainless steel ball
• Independent linearity up to ± 0.1%
• Infinite resolution
• No variation of electrical signal outside theoretical electrical stroke
• Displacement speed up to 10 m/s
• Working temperature: -30...+100°C
• Electrical connections:
  PY2 F 3 wire 1m screened cable
  PY2 C 5-pole connector DIN43322
• Life duration: > 100x106 operations (within C.E.U.)
• Grade of protection IP40
• Suitable for use in explosive environments with presence of gas (groups IIA, IIB, IIC) and combustible powders.
  Standards for simple device:
  ATEX CEI EN 50020 2003 - paragraph 5.4 a