PS Corporation

3M™ Thermally Conductive Acrylic Interface Pad 5571

Product Description 3M™ Thermally Conductive Acrylic Interface Pad 5571 is designed to provide a preferential heat transfer path between heat generating components like integrated circuits and heat spreaders (e.g. aluminum heat sink). 3M pad 5571 consists of a highly conformable, slightly tacky acrylic elastomeric sheet filled with conductive ceramic particles which provide features listed as follows:


Key Features

• High thermal conductivity, 2.0W/m-K on plane direction 
• Good softness and conformability even to non-flat IC surfaces and heat spreading blocks 
• Passes UL 94 V-0 flame retardance test 
• No siloxane outgassing or oil bleeding 
• Soft compliant material allows for pressure relaxation, preventing high pressure zones on components 
• Good electrical insulation properties 
• Slight tack allows easy pre-assembly 
• Good wetting performance for better thermal conductivity.

Product Construction/Material Description Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.

Applications

• IC packaging heat conduction 
• Heat sink interface 
• COF chip heat conduction 
• LED board TIM 
• HD TV address IC chip and scan module board 
• General gap filling in electronic device 
• Mechanical fastening such as clamp, bracket, and screw can be used in parallel with this thermal conductive tape Application Technique 
• To obtain optimum thermal conductivity, good surfaces for wet out are required. For better contact, clean, dry and well unified surface conditions are recommended. Typical surface cleaning solvents are isopropyl alcohol and water (rubbing alcohol) or heptane. Note: Be sure to follow manufacturer’s safety precautions and directions for use when using solvents. 
• Ideal application temperature range is from 0°C to 40°C. Initial application to surfaces at temperatures below 10°C is not recommended because the pad becomes too firm to be wet out readily. However, once properly applied, low temperature holding is generally satisfactory. 

Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Final product specifications and testing methods will be outlined in the products Certificate of Analysis (COA) that is provided once the product is approved by 3M for general commercialization and development work is completed.

Certificate of Analysis (COA) The 3M Certificate of Analysis (COA) for this product is established when the product becomes commercially available from 3M. The Technical Data Sheet (TDS) technical information, test methods and data should be considered representative or typical only and should not be used for specification purposes. The Technical Data Sheet (TDS) information is based on a limited set of test results and do not reflect the COA specification limits. Final product specifications and associated manufacturing facility testing methods used for the commercialized product are outlined in the products Certificate of Analysis (COA) that is provided upon request or with the products shipment. The COA contains the 3M specifications and test methods for the products performance limits that the product will be supplied against. The 3M product is supplied to 3M COA test specifications and the COA test methods. Contact your local 3M Technical Service representative for the COA for this product.

PS Corporation is a group of companies, In which there are two verticals. P&S Innovation and PS Corps. We are teams of young Entrepreneurs who have rich experience in industries like Automotive, Automobile, Plastic, Automation, Electronics, Process Industries.

3M offers a range of thermal tapes designed for various applications that require efficient heat transfer or insulation. Here are a few examples of 3M thermal tapes along with their part numbers and common applications:
1. 3M™ Thermally Conductive Adhesive Transfer Tapes:   - Part Numbers: 8810, 8815, 8820, 8825, 8830   - Applications: These tapes are used for bonding heat sinks, LED modules, and other electronic components to dissipate heat efficiently. They provide high thermal conductivity and electrical isolation.
2. 3M™ Thermally Conductive Interface Tapes:   - Part Numbers: 5590H, 5570H, 5587H, 5588H, 5579H   - Applications: These tapes are used for thermal management in electronic devices, such as LCD displays, LED lighting, and computer components. They provide reliable heat transfer between components and heat sinks.
3. 3M™ Thermally Conductive Acrylic Interface Pads:   - Part Numbers: 5590S, 5591S, 5589H, 5592S   - Applications: These pads are used for thermal coupling and insulation in electronic devices. They are suitable for applications such as power supplies, semiconductors, and automotive electronics.
4. 3M™ Thermally Conductive Silicone Interface Pads:   - Part Numbers: 5510H, 5514H, 5515H   - Applications: These pads provide thermal management in electronic devices, including computers, telecommunication equipment, and power converters. They offer good conformability and thermal conductivity.
5. 3M™ Thermally Conductive Double Coated Tapes:   - Part Numbers: 8940, 8945, 8979, 8810F   - Applications: These tapes are used for heat transfer and bonding applications in electronics, automotive, and aerospace industries. They provide both thermal conductivity and adhesive properties.

We are supplier of Sequential and Combination Timer - TK-415 in all our india..

We are offering 7 -60 VDC GIC Z2221N0G2FT00 7 digits Digital Hour Meter with great, Best Prices and fast delivery support for GIC Products. Our range are LCD Display Hour Meter, Voltage monitoring Relay, under voltage control relay, Controller etc.

• Model No.Z2221N0G2FT00
• Type Counter
• Size (Sq. mm)24 x 48
• DC Supply Voltage (V)85 - 265
• Additional Features Enhanced Accuracy, Quiet Operation, And Attractive Styling In Ane Conomical Design.
• Backlight Green
• Mounting Flush / Panel Mounting
• Type Counter